You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

The terms OVC End Point per UNI attributes and OVC per UNI attributes can be used interchangeably (see Section 7.5 MEF 26.1) For consistency with the term OVC End Point per ENNI Attributes in the Reference Wiki, we refer here to OVC End Point per UNI attributes.

 

1. UNI OVC Identifier

The UNI OVC Identifier is an identifier for the instance of the OVC at a UNI used for management purposes. The Identifier is formed by concatenating the UNI Identifier and the OVC Identifier.

2. OVC End Point Map

The OVC End Point Map is the set of CE-VLAN IDs that map to the OVC End Point at the UNI. The Map can contain one or more CE-VLAN IDs.

3. Class of Service (CoS) ID

The CoS ID is used to determine the Class of Service for a frame at the UNI. The possible values of CoS ID are non-overlapping sets of values of C-Tag Priority Code Point (PCP) values or DCSP values as specified in MEF 26.1 Section 7.5.3.

4. Ingress Bandwidth Profile (BWP) per OVC End Point at a UNI

The Ingress BWP per OVC at the UNI describes the policing by the Operator CEN performed on all ingress Service Frames mapped to the OVC End Point.

5. Ingress Bandwidth Profile per Class of Service Identifier at a UNI


The Ingress BWP per CoS ID at the UNI describes the policing by the Operator CEN performed on all ingress Service Frames with a given CoS ID.

6. Egress Bandwidth Profile Per OVC End Point at a UNI

The Egress BWP per OVC at the UNI describes the policing by the Operator CEN performed on all egress Service Frames mapped to the OVC End Point.

7. Egress Bandwidth Profile Per OVC per Class of Service Identifier at a UNI

The Egress BWP per CoS ID at the UNI describes the policing by the Operator CEN performed on all egress Service Frames with a given CoS ID.

 

 

List of Attributes

References

MEF 26.1

 

 

 

 

 

 

 

 

 

 

 

 

  • No labels