A Framework for MPLS in Transport Networks

 

 

This IETF Request For Comments (RFC) provides useful background information on the transport of Carrier Ethernet services over MPLS-TP networks.

Abstract:

"This document specifies an architectural framework for the application of Multiprotocol Label Switching (MPLS) to the construction of packet-switched transport networks. It describes a common set of protocol functions -- the MPLS Transport Profile (MPLS- TP) -- that supports the operational models and capabilities typical of such networks, including signaled or explicitly provisioned bidirectional connection-oriented paths, protection and restoration mechanisms, comprehensive Operations, Administration, and Maintenance (OAM) functions, and network operation in the absence of a dynamic control plane or IP forwarding support. Some of these functions are defined in existing MPLS specifications, while others require extensions to existing specifications to meet the requirements of the MPLS-TP. This document defines the subset of the MPLS-TP applicable in general and to point-to-point transport paths. The remaining subset, applicable specifically to point-to-multipoint transport paths, is outside the scope of this document. This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionalities of a packet transport network as defined by the ITU-T."

More links relating to MPLS-TP can be found at the Wikipedia page on this topic.

Document download

Wikipedia

Example(s)


Related and Further Reading
 
Categories
 
Status

DRAFT

Source(s)
 
Contributor(s)
 
Reviewer(s)